Quality Lawnmowers

Huntinglover asked:


my Yard Man riding lawnmower 38″ cut discharges a thin strip of grass clippings out the non discharge side as well as the clippings being discharged out the proper side.it is a nice neat strip of clippings.looks like a miniature windrow of cut alfalfa.lol. i cant figure it out,blades are sharpened every 3-4 weeks,deck is cleaned each week,tires are all to correct pressure.any ideas or solutions? this problem just started this season.

Kyle asked:


my mom poured gas where the oil is supposed to be. Not a lot. But enough probably/. THere is some leaking out towards the front of teh engine .

memyselfandeye asked:


its a 7-22651 Murray self-propelled older model, put new gas in the tank & checked the oil, but it still wont start. We got it off craigslist for free and they said it worked fine, but they were obviously lying just to get rid of it.. any ideas on if it could be a simple fix?

Casey v asked:


I’mm working on this lawnmower for a friend, and just wanted to gather a little information before I start. It has the 9hp Kawasaki balanced engine with the cast iron cylinder OHV and electric start. I dont have a manual. The lawnmower doesnt start and has sat for two years. They have replaced the battery numerous times. Also, the starter was recently replaced along with the switch. The problem is definitly electrical/charging related. Heres what I’m going to do. Tell me if you have any other ideas or if you’ve had problems similar. Thank you.

- Change the Oil and Filter
- Siphon out the Gas from the Tank
- Change the Spark Plug
- Replace the Battery
- Clean all Electrical Connections and Safety Switches
- Check the condition of the Belts
- Clean the Carb
- Sea Foam the Engine
- TEST THE STATOR (I believe this is the problem)

What do you think?

G S asked:


position and seems to be missing at lower revs before cutting out. I have thoroughly cleaned carburettor and made new manifold gasket, but still the same. Any advice most welcome
Trueness of flange is a goodie, checked that before reseating. thanks your reply.

Kenny asked:


an older model riding lawnmower..i know where the filter is but where is the carbarator?

troyman2000us asked:


I have a Troy Bilt Model 675 Selp Propel lawmower. I accidentally put gas in oil tank. I have drained the oil tank but it still smells like gas in there. I just don’t want to ruin the lawnmower. Is there anything else I need to do other than refilling the oil tank?

flydog_38 asked:


I just bought a Troy Bilt self-propelled rear-wheel drive lawnmower with a Honda engine and four forward speeds. The problem is that I’d like it to go a little faster than a gentle stroll. It has plenty of power to cut the grass if I push it at a brisk walk downhill, but I wish it would maintain that speed with the drive engaged. Anyone know where I could find bigger wheels that would work or another way to speed it up?

Mogi asked:


Well my lawnmower won’t start I pull it and then at a point it locks and I can’t pull further and so I have to let go. it has enough gas but I was mowing for a bit and then it made a weird squeaky noise and stopped. I checked the oil and saw it was black. can you guys help me im afraid that I burnt out my lawnmowers engine.

Willowy asked:


I have an old Toro Super Pro Recycler II lawnmower and I wish to use the engine to make a go kart. I cannot find any marking of the horsepower on the engine. I need to know how to figure out what the Hp is on my engine.