Comments on: How to connect rechargeable battery in lawnmower? http://www.qualitylawnmower.com/blog/how-to-connect-rechargeable-battery-in-lawnmower/ Thu, 17 May 2012 15:17:48 +0000 http://wordpress.org/?v=2.7 hourly 1 By: tonybradburyuk http://www.qualitylawnmower.com/blog/how-to-connect-rechargeable-battery-in-lawnmower/comment-page-1/#comment-2932 tonybradburyuk Thu, 03 Jun 2010 15:35:33 +0000 http://www.qualitylawnmower.com/blog/how-to-connect-rechargeable-battery-in-lawnmower/#comment-2932 Okay. This is what you do. Place the batteries end to end. Look at the markings. You will see a +ve (positive) and a -ve (negative) sign. The red wire from the mower will go to one battery marked with the +ve. You then go to the other battery and take the black from the machine's ground wire to the terminal marked with the (-ve). Then the two free ends of each battery you couple together. The +ve to the -ve. That's how you get the 24 volts to start the machine. Start the engine, and with avolt meter set to the 50 volts range measure the voltage. The voltage should shoul be about 26 volts. This is the charging voltage. If the voltage is lower tan the 24 volts, then your charger is not charging and the charging circuite need looking at. Job and done. XX<a href="http://www.myislandholiday.com/big-island-vacation-rental.htm"> tonybradburyuk</a> Okay. This is what you do. Place the batteries end to end. Look at the markings.
You will see a +ve (positive) and a -ve (negative) sign. The red wire from the mower will go to one battery marked with the +ve. You then go to the other battery and take the black from the machine’s ground wire to the terminal marked with the (-ve). Then the two free ends of each battery you couple together. The +ve to the -ve. That’s how you get the 24 volts to start the machine. Start the engine, and with avolt meter set to the 50 volts range measure the voltage. The voltage should shoul be about 26 volts. This is the charging voltage.
If the voltage is lower tan the 24 volts, then your charger is not charging and the charging circuite need looking at.
Job and done.
XX tonybradburyuk

]]>