I have a 1998 Craftman lawnmower with a Eager-1 (please read details)?
fordfan444 asked:
I have a 1998 Craftman self propelled lawnmower with a 6.75 H.P. Eager-1 Tecumseh engine. Everytime I start it, it runs perfect for about 1 second and then it quits running like someone hitting the kill switch. When I actually do get it started it reves back and forth. You can actually see the govenor pivoting back and forth. What would cause this and how would one fix this problem?
This entry was posted
on Thursday, March 11th, 2010 at 12:00 am and is filed under Maintenance & Repairs.
You can follow any responses to this entry through the RSS 2.0 feed.
You can leave a response, or trackback from your own site.
I have a 1998 Craftman self propelled lawnmower with a 6.75 H.P. Eager-1 Tecumseh engine. Everytime I start it, it runs perfect for about 1 second and then it quits running like someone hitting the kill switch. When I actually do get it started it reves back and forth. You can actually see the govenor pivoting back and forth. What would cause this and how would one fix this problem?
March 13th, 2010 at 12:20 pm
sounds like the primer button is leaking, [pulling in air]
or a fuel issue, , William B
March 15th, 2010 at 9:18 am
check your spring that works your throttle rod nicky c
March 15th, 2010 at 8:49 pm
I agree with William. Could very well be your primer bulb has a crack in it. Do you see a lot of air bubbles in there when it’s trying to run?
Also check your fuel filter. If it’s clogged, it won’t be able to sustain good fuel flow and will run erratically, if it runs at all. bobseditsuite
March 17th, 2010 at 1:32 pm
Sounds like fuel starvation. Check the fuel line and the fittings it connects to for obstructions. Check the fuel filter if it has one. Make sure the fuel tank is free of debris. If all that checks out you may need to clean or replace the carburetor.
Bert Bert C
March 19th, 2010 at 6:37 pm
Definitly sounds like a carb/fuel issue - if it has an adjustable fuel metering screw ( bottom of float bowl) id adjust it in a bit and see if that helps- if it doesnt have one- well sounds like a carb cleaning is in order - meaning a total disassembly and thourough cleaning. kid360roadrash
March 21st, 2010 at 8:23 am
The carburetor needs to be cleaned and a rebuild kit installed. Take it off, take it apart and soak it in a good parts/carb cleaner, not the spray stuff. Check all the passages and put it back together with a rebuild kit. Make sure the fuel tank is clean too. renpen
March 22nd, 2010 at 12:28 am
have the same engine on my mower, actually im sure its the same year mower as well….anyhow, i usually change the filter and do some cleaning to it… Chris G