Quality Lawnmowers

Megan asked:


I have a 4.75hp briggs and stratton lawnmower. After cutting particularly high grass, my engine has been running slower and then eventually stopping. I changed the air filter, but the engine continues run unevenly and dies out after a short time. Any help if solving this would be appreciated.

lmnjsk asked:


where can i find the user manual for a 12.5 horsepower briggs and stratton lawnmower engine?

koolkat asked:


I have a MasterCut 21. Tipped it on its side to remove blade for sharpening. Left it that way for a few days since I couldn’t remove blade and needed help. Some oil leaked out. Reinstalled blade after sharpening, added oil. Overfilled it by accident. Drained some out through drain plug. Level is perfect now. But lawnmower won’t start. Oil is getting on spark plug when I pull the pull rope. Remove spark plug, clean it up, reinstall, a couple of pulls and the spark plug is already saturated with oil.

How can I get this dang thing started again? My arm is killing me and my lawn is screaming at me. Briggs and Stratton engine, if that makes any difference.

nwprincess asked:


How big a deal is it to take a motor off your old mower and put it on another? The body has totally rusted out on my snapper but the motor is still strong. Can I use any brand base, My mower has a 6.hp Briggs and Stratton on it. Figure if I can find an old one that still is in good shape but motor sucks, I can do it….any help will be appreciated.

Dena H asked:


snapper riding mower with briggs and stratton engine. is there diagram showing where everything connects?

Kev asked:


I have a Briggs and Stratton lawnmower. The pull cord is jammed. When I pull it to start the mower, it comes out maybe 6 inches at the most then it won’t move. Subsequent attempts get hardly any movement at all. I’ve turned it on it’s side and the blade seems to turn okay. It did this a little towards the end of last summer but we haven’t really had any problems this summer so far. Any suggestions?

Kev asked:


I have a Briggs and Stratton lawnmower. The pull cord is jammed. When I pull it to start the mower, it comes out maybe 6 inches at the most then it won’t move. Subsequent attempts get hardly any movement at all. I’ve turned it on it’s side and the blade seems to turn okay. It did this a little towards the end of last summer but we haven’t really had any problems this summer so far. Any suggestions?

wondering asked:


I can keep it running by pushing primer bulb but it dies if I do not keep priming. It seems not to be getting fuel. Once it does start running it usually stays running, but very difficult to restart after refueling for example. Toro with Briggs and Stratton engine.

shefixescars asked:


the mower has a 3.5 briggs and stratton motor, how can i increase the performance of it. it has slowed down through the years.
it is pretty old

mamad asked:


Model #220707 - Type 0139-01. Does it have a governor and if so, where is it at. Thank you!