Posted February 1st, 2010
by admin
tapping toes asked: It is a Craftsman 5.5 HP if that helps…. no, I don’t have the owner’s manual….
Tags: Craftsman, Lawnmower, Oil Change
Posted in Garden & Landscape | No Comments »
Posted October 10th, 2009
by admin
Erik J asked: It still mows fine, except it quits adding grass to the bag and basically just starts mulching whenever the bag is even just 1/3 full. Same when the grass is wet or dry.
It’s a 6.5 Horsepower Craftsman, about 3 years old. Recent new gas, new oil, new filter, new spark. Any ideas?
Tags: Craftsman, Grass, New Oil
Posted in Garden & Landscape | 7 Comments »
Posted October 10th, 2009
by admin
Erik J asked: It still mows fine, except it quits adding grass to the bag and basically just starts mulching whenever the bag is even just 1/3 full. Same when the grass is wet or dry.
It’s a 6.5 Horsepower Craftsman, about 3 years old. Recent new gas, new oil, new filter, new spark. Any ideas?
Tags: Craftsman, Grass, New Oil
Posted in Garden & Landscape | 7 Comments »
Posted May 18th, 2009
by admin
Matthew asked:
I have a 30” 10HP Craftsman mower (M: 502-255040). It runs fine until I engage the blades, then it shakes and cuts out. I can engage a little bit and everything looks like it is turning fine, but at about half engaged, the shaking begins and the engine chokes out. I’m wondering could this be unbalanced blades. They are pretty old, but they were working fine yesterday and I don’t recall hitting anything except an ant hill. Any ideas?
Tags: Ant Hill, Craftsman, Little Bit
Posted in Maintenance & Repairs | 3 Comments »
Posted March 21st, 2009
by admin
Sam Sneed asked:
Standard Craftsman push mower runs for about a minute, then sputters to a stop. I accidentally left gas in it all winter long. I mowed with that gas and it worked fine. Then it ran out of gas, and after I put more in, this problem started. Also afterwards, it won’t start again until at least 10 minutes later. I changed the oil & put in fresh gasoline, that didn’t fix it. Any suggestions?
Tags: Craftsman, Gasoline, Running
Posted in Maintenance & Repairs | 5 Comments »
Posted March 16th, 2009
by admin
jmncvx7 asked:
i put in more oil, gas, pressed the cold start button and changed the spark plug last yr
do i need to changed the spark plug every year????
and i cleaned the bottom last yr
its a craftsman 6.75 Eager-1
Tags: Cold Start, Craftsman, Eager 1
Posted in Garden & Landscape | 5 Comments »
Posted March 13th, 2009
by admin
KNOWLEDGE asked:
my lawnmower starts but turns off after the primed gas is gone.
how do i get it to stay on? what might be wrong? it is a craftsman 550 series 158cc 22in. cut. the lawnmower is only about 7 mo. old. i replaced the sparkplug but still it won’t stay on. please help!!!!!!
Tags: Craftsman, Lawnmower, Sparkplug
Posted in Garden & Landscape | 10 Comments »
Posted March 6th, 2009
by admin
andy c asked:
i’ve narrowed it down to craftsman, toro, husqvarna. i’m currently leaning toward husqvarna.
i just bought a husqvarna with a honda engine. thanks for the input. except for the guy talking about a reel mower i don’t think he ever used one!
Tags: Craftsman, Husqvarna, Reel Mower
Posted in Garden & Landscape | 8 Comments »
Posted March 2nd, 2009
by admin
voss1241 asked:
I have an 18.5 HP 42” deck Craftsman riding lawnmover that is ~3years old (46 hours used) and last week I “threw a rod”. How much could I sell it for?
Tags: Craftsman, Hp, Lawnmover
Posted in Maintenance & Repairs | 4 Comments »
Posted February 22nd, 2009
by admin
revitup asked:
my craftsman front-wheel drive self propelled mower pulls to the right instead of going straight. the drive wheels both turn at the same speed,the wheels are the same diameter what else would cause this?
Tags: Craftsman, Diameter, Wheel
Posted in Maintenance & Repairs | 5 Comments »