How do you remove a primer button form a snapper lawnmower engine?
Posted November 16th, 2009 by admin 1 Comment »
Posted November 16th, 2009 by admin 1 Comment »
How do I adjust fuel mixture on Snapper lawnmower?
Posted September 21st, 2009 by admin 2 Comments »
JDH asked:
My snapper self propelled (walk behind) lawn mower (briggs and stratton 6.0 engine) starts but barely runs(real rough) - sounds like carbuerator - either too much or too little fuel.
needs adjustment. BUT I don’t know how to get at it to adjust it.
Can you describe how to do this or else give links to manuals or other info on how to do this.
My snapper self propelled (walk behind) lawn mower (briggs and stratton 6.0 engine) starts but barely runs(real rough) - sounds like carbuerator - either too much or too little fuel.
needs adjustment. BUT I don’t know how to get at it to adjust it.
Can you describe how to do this or else give links to manuals or other info on how to do this.
Thanks
How to tighten drive belt or mechanism on Snapper SR3200 Lawnmower?
Posted April 9th, 2009 by admin 1 Comment »
Rifleman 4 asked:
When mower is running, the drive will stall and mower will not move forward. Can be in any speed gear. Usually mower will stop forward movement on steep grades, indicating drive belt slippage
When mower is running, the drive will stall and mower will not move forward. Can be in any speed gear. Usually mower will stop forward movement on steep grades, indicating drive belt slippage
How much gear oil does a transmission of a Snapper self propelled push lawnmower hold?
Posted April 9th, 2009 by admin 1 Comment »
Craig C asked:
I just put a used transmission on my mower, but wanna change the gear oil in it. How much should i pour in?
I just put a used transmission on my mower, but wanna change the gear oil in it. How much should i pour in?
How much will it cost to replace the crankshaft on my Snapper Lawnmower?
Posted February 28th, 2009 by admin 7 Comments »
selbrit asked:
It’s a Snapper Push-Mower, and I hit a pipe and I think I bent the crankshaft. How much will it cost to repair?
I don’t think the engine itself is damaged, because I got it to start, it just makes the whole mower shake uncontrollably (so I quickly switched it off). I think it’s just a bent crankshaft, which is causing the blade to oscillate instead of turn on center.
It’s a Snapper Push-Mower, and I hit a pipe and I think I bent the crankshaft. How much will it cost to repair?
I don’t think the engine itself is damaged, because I got it to start, it just makes the whole mower shake uncontrollably (so I quickly switched it off). I think it’s just a bent crankshaft, which is causing the blade to oscillate instead of turn on center.
Why is my Snapper lawnmower running very rough?
Posted January 21st, 2009 by admin 5 Comments »
JDH asked:
After sitting all winter my Snapper lawnmower starts but
is running like a car engine that has a few plugs missing.
Terribly rough. I took out the plug and cleaned the contacts but no change. I had it tuned up last year.
Can a lawnmower with a bad plug run with a miss?
Any ideas?
Thanks.
After sitting all winter my Snapper lawnmower starts but
is running like a car engine that has a few plugs missing.
Terribly rough. I took out the plug and cleaned the contacts but no change. I had it tuned up last year.
Can a lawnmower with a bad plug run with a miss?
Any ideas?
Thanks.